Read the latest press releases...

Temperature valves have high rating for enhanced performance
March 2004

Thermostatic value designed for compressor lubricating oil
January 2004

Temperature valves have high rating for enhanced performance

March 2004

The AMOT EL internally sensed temperature control valve has a much higher pressure rating than the previous EO model, with a new 24 bar (355 psi) rating and a greatly enhanced performance in providing reliable automatic control of fluid temperatures in areas of high vibration and extreme ambient conditions.

This high-pressure cast iron valve is available in a 1 in unit ideal for such applications as cooling water and lubricating oil circuits on diesel engines, compressors or gearboxes and also offered to meet offshore requirements. It can be mounted in any position and has a positive proportional action.

The AMOT E Valve range combines low friction characteristics with vibration/shock resistance and a rugged, robust construction for long life. The tamper-proof and environmentally friendly valves have flow rates from 8 to 18m3/hr and can be used for diverting or mixing operations.

The EL threaded model is fully interchangeable with the EO valve it replaces, using the same spare parts. There are also flanged models and a type with manual override. Body material choices are bronze, cast Iron, steel and stainless steel and seal options include Nitrile, Viton and Neoprene.

back to top >


Thermostatic valve designed for compressor lubricating oil

January 2004

The AMOT Filterstat valve offers cost savings and performance benefits for screw compressor manufacturers by incorporating the features of a direct filter connection on the thermostatic valve for the lubricating oil system, as well as an optional integral differential pressure switch that indicates when the filter needs replacing.

Suitable for mixing or diverting applications, the valve is compact in size and designed to reduce cost by eliminating piping connections, and providing improved performance through having less potential leakage paths. It is ideal for compressor oil cooling systems in all environments.

Units have an aluminium body and Viton seals. Specifications include a flow rate of 2 to 8m3/hr with maximum 25 bar working pressure and control temperatures from 49 to 113°C.