Skip Navigation LinksHome|Applications|Engine Control & Monitoring|Temperature Control Valves|Actuated Temperature Control Valves & Accessories
Actuated Temperature Control Valves

Actuated Temperature Control Valves & Accessories

Actuated Temperature Control Valves - Electric and pneumatic actuation; wide range of Sizes 2” to 18”; Flow ranges: 37 to 8300 GPM.

G Electrically Actuated Valve

Model G 3-Way Rotary Valve (2" to 18" | DN50 to DN450)

Flow to: 3000m3/hr (13,200 us gpm)
Sizes: 50mm to 400 mm (2" to 16")
Rotor material: Bronze or stainless steel
Rotor shaft: Stainless steel
Shaft seal material: Viton rubber (GEF) Nitrile or Viton (GPD)

For complete specifications, click on documentation tab to select a datasheet.

8071 Controller

8071D Panel Mount Controller

Controller type: Fully configurabel PID with digital filtering and selectable parameter sets
Input: Universal sensor input 2 or 3 wire RTD, TC, 4-20mA selectable
Input sensing range: Selectable as required Max. -200 to 850°C -328 to 1562°F
Supply: 93 to 263 VAC, 48 to 63Hz @8VA Quiescent
Input accuracy: RTD within 0.05%
TC within 0.25%
4-20mA within 0.1%
Environmental: 0 to 55°C operational
EMC: EN 61326 Class B
Solid state relay: 25A rated, opto-isolated, zero-cross switching 600V pk-pk

See datasheet for complete specifications.

8072D Controller

8072D Bulkhead Mount Controller

Controller type: Fully configurable PID with digital filtering and selectable parameter sets
Input: Universal sensor input 2 or 3 wire RTD, TC, 4-20mA selectable
Input sensing range: Selectable as required Maximum -200 to +850°C
(-328 to 1562°F) Typical setting: 0° to 120°C
Supply: 93 to 263 VAC, 48 to 63Hz @8VA Quiescent
Input accuracy: RTD within 0.05%
TC within 0.25%
4-20mA within 0.1%
Input sampling: 50 to 250ms interval (user configurable)
Dynamic resolution up to 16 bit
Environmental: 0 to +50°C operational -40 to +70°C (40 - 158°F) storage RH<90% (non condensing)

See datasheet for complete specifications.

SG80

SG80 Pneumatic Controller

Body material: Die cast aluminum with anti-corrosive paint
Cover: ABS    
Degree of protection: IP54    
Pneumatic connections: 1/4" NPT with fittings for 4mm (0.16) pipe size
Supply air pressure: 1.4 +/- 0.1 bar 20 +/- 1.5 psi  
Output: 0.2/1 bar 3/15 psi  
Adjustable control parameters: P.Band 200% Reset time >0...>10 rep/min
Steady state air consumption: Air supply
20 psi
1.4 bar 0.13 Nm^3/h
Max. air delivery: Air supply
20 psi
1.4 bar 2.6 Nm^3/h

See datasheet for complete specifications.

8060A

8060 3-Wire PT100 Temperature Sensor

Temperature range: -100 to 250°C -150 to 482°F
Accuracy: IEC 751:1983 BS EN60751:1996
Class B
RTD: 3 wire platinum 100 Ohm element
Connection head: Heavy duty aluminum IP67
Conduit thread: M20, PG 13.5" or 16", 1/2 NPT 
Thermal well: Stainless steel  
Installation thread: 1/2" BPS, Tr, 1/2" NPT  
Terminations: Threaded  

See datasheet for complete specifications.

8064A

8064A Electro/Pneumatic (I/P) Converter

Supply Pressure: 1.3 to 2.1 bar 18 to 30 psi
Input: 4 to 20 mA  
Output: 0.2 to 1 bar 3 to 15 psi
Zero offset adjustment: +40% to -20% of span
Output capacity: 0.16 SCFM 
Output volume 170cc max. recommended
Coil resistance: 185 Ohms 
Vibration: 5 - 100 Hz 4g Lloyds Register requirement for equipment mounted on-engine

See datasheet for complete specifications.

Electro-Pneumatic (I/P) Converter

8064C Electro/Pneumatic (I/P) Converter

Supply pressure: 1.2 to 10 bar 18 to 150 psi
Output: 0.2 to 1 bar 3 to 15 psi
Supply sensitivity: Less than 0.1% span over full supply pressure range
Flow: Max 300N l/min (12 scfm)
Air consumption: <2.5N l/min at 50% signal (0.025 cfm)
Temperature effect: Typically less than 0.035% of span/°C between -40°C to +85°C (-40°F to +185°F)
Response time: 1 sec (from 0 to 90% or 100 to 10% of output pressure into a 0.5 litre load)
Degree of protection: IP66, NEMA 4X (when mounted upright)
Linearity: <0.1% of span
Hysteresis: <0.1% of span

See datasheet for complete specifications.