|
| Housing and cover material: |
Precision cast aluminum black anodized |
| Internal parts: |
Aluminum and plated steel |
| Max. operating temp.: |
93°C |
200°F |
| Max. valve inlet pressure: |
620 kPa |
90 psi |
| Reset pressure: |
207-1724 kPa |
30-250 psi |
| Flow coefficient: |
Kv = 0.17 |
Cv = 0.2 |
| Vibration sensing range: |
horizontal surface - 6G |
vertical surface - 5G |
| Switch ratings: |
125/250 VAC:
125/250 VAC:
28 VDC:
28 VDC: |
1/4 hp
10 amp
3 amp (inductive)
24 amp max. in rush |
See datasheet for complete specifications.
|
|
| Housing and cover: |
Precision black, anodized cast aluminum |
| Internal parts: |
Aluminum and plated steel |
| Standard seals: |
Viton |
| Maximum operating temp: |
93°C |
200°F |
| Pneumatic reset pressure: |
207 - 1724 kPa |
30 - 250 psi |
See datasheet for complete specifications.
|
|
| Function: |
Armature mechanism trips on high vibration and activates snap action switch(es) |
| Amplitude range: |
2 - 10 g |
| Frequency range: |
0 to 3600 RPM |
| Reset: |
Local reset plus optional remote reset electrical coil. |
| Start delay: |
Applying reset coil voltage at startup holds mechamism from tripping for 20 to 30 seconds, after which the switch is automatically activated. Requires electric reset option. |
| Temperature range: |
-40 to 70°C |
-40 to 158°F |
| Enclosure: |
Cast aluminum |
| Switch contact(s) rating: |
15 amps, 125 or 480 VAC
1/2 amp, 125 VDC
1/4 amp, 250 VDA
|
1/8 hp, 125 VAC
1/4 hp, 250 VAC
|
| Hazard rating: |
UL, ATEX, depending on model ordered |
See datasheet for complete specification.
|
|
| Sensor: |
Piezoelectric accelerometer with integral signal conditioner |
| Output current: |
4-20 mA, 2 wire |
| Impact range: |
Output proportional to impacts over an adjustable time
base of 0.8 to 3.2 sec. 16 impacts provide a full scale range (20 mA) |
| Impact threshold: |
Threshold is field adjustable from 0.5g to 30g |
| Temp. range: |
-40 to 211°C |
-40 to 413°F |
See datasheet for complete specifications.
|
.jpg "8590 Vibration Transmitter")
|
| Vibration range: |
1 - 3 ips |
25 - 75 mm/s pk |
| Output range: |
4 - 20 mA |
|
| Frequency range: |
6 to 1500 Hz |
360 to 90,000rpm |
| Axis orientation: |
Any |
| Supply voltage (Vs): |
10 to 60 VDC |
| Maximum load resistance (RL): |
50 (Vs - 10) Ohms |
| Isolation: |
500V |
circuit to case |
| Electrical connection: |
2 wires, AWG#18 |
60 cm long |
24 inches |
| Temp. rating: |
-40 to 100°C |
-40 to 212°F |
| Enviornmental rating: |
NEMA 4, IP65 |
| Non-hazardous, CSA, NRTL, CENELEC and EEx rated |
See datasheet for complete specifications.
|