 |
|
|
 |
|
|
 |
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
8210J Speedtrap electronic speed switch installation kit |
 |
 |
|
|
A. 11415 Push-Button Switch
 |
Mount in dash in easy to reach location. Requires 1/2" dia. mounting hole in dash. Mount the switch so the dash board is sandwiched between the nut (behind the dash) and the threaded ring (so ring is visible from the dash). |
|
B. 9674L007 Dash Label |
Affix to dash over Push-Button Switch 11415 by adhesive backing or with screws. |
|
C. 11453L001 Toggle Switch |
Mount in dash in easy to reach location. Requires 1/2" dia. mounting hole in dash. Mount the switch so the dash board is sandwiched between the nut (behind the dash) and the threaded ring (so ring is visible from the dash). |
|
D. 11456L001 Switch Guard |
Mount over Toggle Switch 11435L001. Secure Switch Guard base between dash surface and switch mounting ring. |
|
E. 9674L0009 Dash Label |
Affix to dash over Toggle Switch 11453L001 and Switch Guard 11456L001 by adhesive backing or with screws. |
|
F. 10747X001 Shielded Cable Assembly |
Connect two terminal end (the end with the rubber boot) of cable to Magnetic Pick-Up (AMOT 11408). Connect 3 terminal end of cable to AMOT Speedtrap 8210J Electronic Speed Switch.Connect insulated leads to Termi-nals 3 and 4. Connect noninsulated lead to Terminal 2 (Ground). |
|
G. 10811 Mag Pick-Up Adaptor Bushing |
Adapter bushing can be used to provide additional mounting location for AMOT 11408 Magnetic Pick-Up if the engine's dedicated Magnetic Pick-Up holes are already in use. Adapter bushing is mounted in bottom drain hole of engine flywheel housing (1" NPT male thread). AMOT 11408 Magnetic Pick-Up is inserted in Adapter Bushing's 3/4-16 female thread. |
|
H. 11416 Crimp Connector |
Crimp Connectors are for connections on Toggle Switch 11453L001 and Push-Button Switch 11415. |
Sample Installation Diagram |
|
| back to product categories >
This and other information from AMOT provide product or system options for further investigation by users having technical expertise. Before you select or use any product or system, it is important that you analyze all aspects of your application and review the information concerning the product in the current product catalog. The user, through its own analysis and testing, is responsible for making the final selection of the system and components and assuring that all performance, safety and warning requirements of the applications are met.
©1997-2005 AMOT
|
|
