Control System Accesories

General Instructions

All of the accessories shown above are for use with other AMOT safety and sequencing components in control systems. For proper application, refer to AMOT control system literature or to customer's specification drawings

Important

When installing accessories be sure all parts are clean, especially the small orifices. Do not allow compound or other foreign material to enter the fittings. Consult the Amot factory if alternate sizes or special materials are required. These can usually be provided on special order.

2185 Orifice

2185L001 .014 DIA	Cv = .004
2185L002 .031 DIA	Cv = .020
2185L003 .125 DIA	CV = .47
2185L004 .040 DIA	Cv = .030
2185L005 .062 DIA	Cv = .10
Material	3/4 brass hex.
Max. Pressure	300 psi
Net Weight	6 oz.

2690 Accumulator 18 cu. in.

Material....................................stainless steel
Max. Pressure.....................................300 psi
Net Weight..............................................6 oz.

2760 Check Valve

Material....................................7/8 brass hex.
Max. Pressure.....................................300 psi
Min. Pressure to Open............................2 psi
Flow Coefficient.................................Cv = .3
Net Weight..............................................6 oz.

2790B Shuttle Valve 1/4 NPT

Material..................................................brass
Max. Pressure.....................................150 psi
Pressure Differential to Operate..............5 psi
Flow Coefficient.................................Cv =1.6
Net Weight...............................................1 lb.

2768 Quick Release Valve

Max. Pressure.....................................250 psi
Differential to Release............................5 psi
Flow Coefficient In to Out...................Cv = 2.5
Out to Exhaust.............................Cv = 2.0
All Ports..............................................3/8 NPT
Net Weight............................................3/4 lb.
Shipping Weight.......................................1 lb.

4125 Vent Closure For 1/4 NPT Threaded

Body Material.......................................Plastic
Valve Material.........................Silicon Rubber
Used for excluding dirt, corrosive atmospheres, and insects form critical internal working parts of controls.
(Note: This is not a "breather". It will exhaust only.)

4125 vent closure for 1/4 NPT threaded

back to product categories >

This and other information from AMOT provide product or system options for further investigation by users having technical expertise. Before you select or use any product or system, it is important that you analyze all aspects of your application and review the information concerning the product in the current product catalog. The user, through its own analysis and testing, is responsible for making the final selection of the system and components and assuring that all performance, safety and warning requirements of the applications are met.